(상단)주메뉴 바로가기 (왼쪽)하위메뉴 바로가기 본문 바로가기 하단(Copyright) 바로가기

KAIST는[Travel] 세상을 향해 자유롭게 발을 내딛는 KAIST는 나의 길을 찾아 떠나는 여행이다

홈페이지가이드 Homepage Guide

Hierarchical Porous Titanium Nitride Synthesized by Multiscale Phase Separation for LSBs

작성자 : PR Office 등록일 : 2019-01-28 조회수 : 1874 메일 : kaistpr@kaist.ac.kr

Hierarchical Porous Titanium Nitride Synthesized by Multiscale Phase Separation for LSBs 이미지1
(from left: Professor Jinwoo Lee and PhD candidate Won-Gwang Lim)

A KAIST research team developed ultra-stable, high-rate lithium-sulfur batteries (LSBs) by using hierarchical porous titanium nitride as a sulfur host, and achieved superior cycle stability and high rate performance for LSBs. 

The control of large amounts of energy is required for use in an electric vehicle or smart grid system. In this sense, the development of next-generation secondary batteries is in high demand. Theoretically, LSBs have an energy density seven times higher than commercial lithium ion batteries (LIBs). Also, their production cost can be reduced dramatically since sulfur can be obtained at a low price. 

Despite these positive aspects, there have been several issues impeding the commercialization of LSBs, such as the low electric conductivity of sulfur, the dissolution of active materials during operation, and sluggish conversion reactions. These issues decrease the cycle stability and rate capability of batteries. 

To tackle those issues, Professor Jinwoo Lee from the Department of Chemical and Biomolecular Engineering and his team synthesized a well-developed hierarchical macro/mesoporous titanium nitride as a host material for sulfur. The titanium nitride has a high chemical affinity for sulfur and high electrical conductivity. As a result, it prevents the dissolution of active materials and facilitates the charge transfer. Moreover, the synergistic effect of macropore and mesopore structures allows the stable accommodation of large amounts of sulfur and facilitates the electrolyte penetration. 

Previously reported polar inorganic materials have a high affinity for sulfur, but it was challenging to control the porous architecture suitable to the sulfur host. This work breaks such limitations by developing a synthetic route to easily control the porous architecture of inorganic materials, which led to obtaining superior cycle stability and high rate capabilities.

Professor Lee said, “Some problems still remain in commercializing LSBs as next-generation batteries. Hence, there should be a continued research on this matter to solve the issues. Through this research, we secured a key technology for ultrastable, high-rate LSBs.”

This research was led by PhD candidate Won-Gwang Lim and collaborated on by Jeong Woo Han from POSTECH. It was chosen as the cover article of Advanced Materials on January 15, 2019. 

Figure 1. Schematic illustration for the synthetic route of co-continuous h-TiN
Figure 1. Schematic illustration for the synthetic route of co-continuous h-TiN


Figure 2. The hierarchical multiscale porous structure is still retained without any collapse after the conversion to h-TiN. The good retention of the porous structure is attributed to the thick pore wall of the h-TiO₂derived from the block copolymer self-assembly
Figure 2. The hierarchical multiscale porous structure is still retained without any collapse after the conversion to h-TiN. The good retention of the porous structure is attributed to the thick pore wall of the h-TiO₂derived from the block copolymer self-assembly

 Figure 3. The cover page of Advanced Materials
Figure 3. The cover page of Advanced Materials



파일 :

개인정보처리방침이메일주소집단수집거부

34141 대전광역시 유성구 대학로 291 한국과학기술원(KAIST) / T.042-350-2114 / F.042-350-2210(2220)

Copyright (C) 2014, Korea Advanced Institute of Science and Technology, All Rights Reserved.

Web Accessibility 인스타그램 유튜브 KAIST트위터 KAIST페이스북 정부 3.0